Installation variant A

Step 3 from 3

Step 3

Set up display

Put on your helmet as usual. Attach the head-up display to the helmet adapter using the magnets and fold the display down at a 45° angle. The display should now be clearly visible in front of your right eye.

Set the display correctly

Press the operating button on the Head-Up Display module to switch the device on. A message appears on the display.

Check that you can see the entire display clearly without changing the position of the helmet on your head. To do this, look forwards as you would in traffic. If the display is blurred or not easy to read, you can slightly change the angle of the display.


Das Display weist eine monochrome Farbe auf, die so in der Natur nicht vorkommt

You can show the frame again at any time for orientation during alignment. To do this, activate the "Adjustment mode" in the "Settings" app menu.

Readjust the display if necessary

If the frame shown on the display is completely or partially outside your field of vision, remove the Head-Up Display module and the helmet adapter from the helmet and move the helmet adapter slightly in the desired direction. Adjust the position of the helmet adapter until all the conditions listed on this page are met.


You have successfully installed the helmet adapter in your helmet. You will now be guided through the next steps in your app.

Subscribe to the newsletter now

Don't miss out on any more news and promotions and subscribe to our newsletter today.